Battle Tanks Nederland

BTN is de club voor 1:16 en 1:15 RC BATTLE SYSTEM tankliefhebbers
Het is nu 29 maart 2024, 06:41

Alle tijden zijn GMT + 1 uur




Plaats een nieuw onderwerp Antwoord op onderwerp  [ 12 berichten ] 
Auteur Bericht
BerichtGeplaatst: 28 apr 2016, 18:12 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
Been running my Stock Torro Jagdtiger for a while now , but desided I wanted to make it more 'mine'
Removing skirts and New Paint job Down the road .

Skirts coming of , now That involves a bit of hack'n slash , and some work With sheets of evergreen , not my strongest side but here is how I did it .

Afbeelding

Afbeelding

With fenders of, time to remove the last strip of molded plastic. Also this is the part that needs filling inn later

Afbeelding

Afbeelding

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 28 apr 2016, 18:12 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
With that removed, time to fill in the gaps

Afbeelding

Afbeelding


Afbeelding

Afbeelding

Afbeelding

I would have liked to have 1 mm on the outside, but my LHS was out, so it had to be 0,5mm

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 28 apr 2016, 18:13 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
This is out of my comfy zone , and I would think this small job is a no brainer for all that have been a little into evergreen sheet work , but I have to take my time not f... it up ;D

Side plate cut to shape and holes for Tools/cables etc are drilled

Afbeelding

Add a few Ludwig parts

Afbeelding

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 28 apr 2016, 18:14 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
Paper cut out's for test fitting

Afbeelding

Afbeelding

Afbeelding

Afbeelding

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 28 apr 2016, 18:17 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
not much other than a few weld lines

Before :
Afbeelding

after
Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 28 apr 2016, 18:18 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
Been a few weeks now since I had time to sit Down With the Jagd.

Here is this Nights work

Afbeelding

Afbeelding

Afbeelding
Afbeelding
Afbeelding
Afbeelding
Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 29 apr 2016, 15:44 
Nice work all the fiddling : Thumbup :
gr Erik


Omhoog
  
 
BerichtGeplaatst: 30 apr 2016, 08:24 
Offline
Gebruikers-avatar

Geregistreerd: 12 jan 2005, 20:22
Berichten: 3348
Woonplaats: gorinchem
Would item not have been beter to include the superstructure tot the sideplate?
This was 1 single plate on the real machine

_________________
http://s38.photobucket.com/user/reinier ... 1.mp4.html

http://s38.photobucket.com/user/reinier ... w.mp4.html


Omhoog
 Profiel  
 
BerichtGeplaatst: 30 apr 2016, 10:42 
Offline
BTN Site Admin
Gebruikers-avatar

Geregistreerd: 04 jan 2005, 11:41
Berichten: 2284
Woonplaats: Gemert
As it as stated in top of this topic:
<<This is out of my comfy zone , and I would think this small job is a no brainer for all that have been a little into evergreen sheet work>>

This guy is probably working with evergreen for the first time. Needs to learn.

Until now not bad result at all.

Regards,
Jan

_________________
Wie vrijheid opoffert voor veiligheid is beiden niet waard.
(Benjamin Franklin)


Omhoog
 Profiel  
 
BerichtGeplaatst: 30 apr 2016, 17:15 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
True true Reiner , a mistake by me . but Lucky only 0,5mm used for side plate , so the small gap between upper part and side wall will not be so noticable.. I will fill it With mud : Chessygrin :

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 01 mei 2016, 06:34 
Offline
Gebruikers-avatar

Geregistreerd: 12 jan 2005, 20:22
Berichten: 3348
Woonplaats: gorinchem
What you canon also do is apply aan 0.5mm sheet tot the top part and fill the line beween the 2
Is a bit more work but looks far better that way : Thumbup : : Thumbup :

_________________
http://s38.photobucket.com/user/reinier ... 1.mp4.html

http://s38.photobucket.com/user/reinier ... w.mp4.html


Omhoog
 Profiel  
 
BerichtGeplaatst: 01 mei 2016, 18:30 
Offline

Geregistreerd: 04 apr 2012, 22:46
Berichten: 114
I will look into it . Maybe when I put top back on , it will not feel right without change that also.

BTW, on photo, the top super struckture is not 'snapped' into Place , only resting on top loosly ,
like this

Afbeelding


Omhoog
 Profiel  
 
Geef de vorige berichten weer:  Sorteer op  
Plaats een nieuw onderwerp Antwoord op onderwerp  [ 12 berichten ] 

Alle tijden zijn GMT + 1 uur


Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers en 5 gasten


Je mag geen nieuwe onderwerpen in dit forum plaatsen
Je mag niet antwoorden op een onderwerp in dit forum
Je mag je berichten in dit forum niet wijzigen
Je mag je berichten niet uit dit forum verwijderen

Ga naar:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB.nl Vertaling