Battle Tanks Nederland

BTN is de club voor 1:16 en 1:15 RC BATTLE SYSTEM tankliefhebbers
Het is nu 07 aug 2020, 16:01

Alle tijden zijn GMT + 1 uur




Plaats een nieuw onderwerp Antwoord op onderwerp  [ 5 berichten ] 
Auteur Bericht
BerichtGeplaatst: 01 mei 2014, 20:47 
Offline
Gebruikers-avatar

Geregistreerd: 26 apr 2013, 20:43
Berichten: 274
Woonplaats: Rheinland Pfalz
Hi ,

Recently, I 've rebuilt the RCC HL Leo on a servo driven RCC and Evolation . In addition I have created almost all parts of the 3D printer which works better than I thought have .

As more than 90 % of the necessary work consists in the parts on the PC to construct and the printer then runs automatically , I can make pretty good by the way in my local so I 'm just going to attack the next tank.

I have nich a Panzer IV turret lie with me and so now is diesern turn.
Here ever get the parts on the printer

Afbeelding

And here a first fitting in the tower.

Afbeelding

Afbeelding

Afbeelding

Afbeelding

The design I have also adapted not only to the tower, which is much smaller , yes, but also the servo mount printed to a stop this time separately. These can then be fit to stick to the existing servos with superglue on the rocker , or just the servos directly to the edition. I 've also changed with the parts for HL- Leo . At the tower itself you must then adjust only a little.

Because I 'm doing so I'm going to do the same thing piece by piece to the other HL- tanks. For the Stug and Jagdpanther there will be two versions . With or without side straightening.

Cheers , Edwin


Omhoog
 Profiel  
 
BerichtGeplaatst: 06 mei 2014, 16:03 
Offline
Gebruikers-avatar

Geregistreerd: 26 apr 2013, 20:43
Berichten: 274
Woonplaats: Rheinland Pfalz
And here it goes a little further.

Yesterday, the first version of the canon rocker ran with side direction for the Jagdpanther from the printer disk. This I will still need to adjust a little and change, but they will soon be finished.

Afbeelding


Omhoog
 Profiel  
 
BerichtGeplaatst: 06 mei 2014, 16:46 
Offline
Gebruikers-avatar

Geregistreerd: 12 jan 2005, 20:22
Berichten: 3339
Woonplaats: gorinchem
Is this the same pArt as for a stug?
Iam building a stug D and love to try it inside it

_________________
http://s38.photobucket.com/user/reinier ... 1.mp4.html

http://s38.photobucket.com/user/reinier ... w.mp4.html


Omhoog
 Profiel  
 
BerichtGeplaatst: 06 mei 2014, 17:02 
Offline
Gebruikers-avatar

Geregistreerd: 26 apr 2013, 20:43
Berichten: 274
Woonplaats: Rheinland Pfalz
Hi Reinier,

I do not know if it fits so well into the Stug. I'll have to try yet, because I have made the rocker relatively long in order to achieve a good weight balance for the heavy tube.
Besides these I want to let try out a particular type of control from a friend that avoids mutual interference between the movements

Cheers, Edwin


Omhoog
 Profiel  
 
BerichtGeplaatst: 13 mei 2014, 13:57 
Offline
Gebruikers-avatar

Geregistreerd: 26 apr 2013, 20:43
Berichten: 274
Woonplaats: Rheinland Pfalz
And on it goes with the HL- T34 and the ZTZ .

As Michael has already hinted at ZTZ is somewhat different than the other tanks of HL , but this is also the T34 like this.
In both of the pivot point is set forward and the axes of the rockers are superfluous.

In the T34 I have adapted ever profisorische a rocker from the Panzer III . But I will also change so that it comes out of the printer it right .

Afbeelding

What I still have to think about is how I can cannon tube on the guide zoom reasonable and extended to give a recoil is possible. Too large a movement is due to the construction of HL , however, not possible spin on the Bassis to a smaller diameter without this .

When ZTZ paßst ever manage to achieve rocker of the Panthers with the lateral direction . A small adjustment but I will also do as yet .

Afbeelding

Only the Simple tile recoil is not possible in the usual way , since HL has replicated over the gun barrel the rain cover fabric in plastic . I would have to cut and also make fabric . Since I 'm going to talk to Michael, who kindly sent me the towers . Perhaps, however, I find yet another solution to it.


Omhoog
 Profiel  
 
Geef de vorige berichten weer:  Sorteer op  
Plaats een nieuw onderwerp Antwoord op onderwerp  [ 5 berichten ] 

Alle tijden zijn GMT + 1 uur


Wie is er online

Gebruikers op dit forum: Geen geregistreerde gebruikers en 1 gast


Je mag geen nieuwe onderwerpen in dit forum plaatsen
Je mag niet antwoorden op een onderwerp in dit forum
Je mag je berichten in dit forum niet wijzigen
Je mag je berichten niet uit dit forum verwijderen

Ga naar:  
Powered by phpBB® Forum Software © phpBB Group
phpBB.nl Vertaling