Battle Tanks Nederland

Fra Drammen

I know people there, Frank Herbro i think he is now running on Ingeniør Rybergate a fysio practice (he was a member of our sykkleclub for a few years) nice guy and always full of fun.
With our Cyclekklubteam we have been also some times to Horten and Tønsberg 4 dagers also to Lørenskogg (so we raced almost at your doorstep ), but most of the time to Hønnefoss at Ringerike GP during te 90's. Made over more then 11 trips with our team to your beautiful country and still got some friends in Horten and Stavanger during those years jei forstår litt norsk but .......men ikke skrive

I use the impact with the DDG (no hop up gears) works fine for me.

It's no permanent battleground (hope to get one sometime) but (try) to organize some differtent meetings during the year.
Here some rebuild pictures off my Tiger II http://www.battletanksnederland.nl/phpB ... f=9&t=4658
Also some pictures off the tank on his local playground, scroll down a little http://www.battletanksnederland.nl/phpB ... 6&start=15

I have a nice buid tread link for you, but i think you allready know him
http://www.naritafamily.com/howto/kingt ... _frame.htm

Vennlig hilsen Wilco

hah, this is funny my friend, you have indeed been at my 'doorstep'. I google Frank, and found a nice picture, he is running something called healt+ .

Thanks 4 the links, and yeas I have that KT build in my top fav folder If I get a clean kit I will use that as reference

also I found you're rebuild post, pic nr 7 ( were you can see one motor) Is that before the impact TU's ? it sit's wery high. maxx geardown ?

Last pic's of today. a 1/48KT I did while waiting for my 1/16 to show up.

from this


IMG_3453 (Large) by maxsollie, on Flickr

During


IMG_3464 (Large) by maxsollie, on Flickr

to this

IMG_3487 (Large) by maxsollie, on Flickr

IMG_3493 (Large) by maxsollie, on Flickr

IMG_2468 (Large) by maxsollie, on Flickr

Also my long gone Tamiya LEO stock built ( miss it now) And HL Tiger, with full lower hull - 3/1 - M tracks


IMG_0843 (Large) by maxsollie, on Flickr

IMG_0579 (Large) by maxsollie, on Flickr


IMG_3513%20(Large) by maxsollie, on Flickr

IMG_1573%20(Large)_ by maxsollie, on Flickr


thanks 4 watching

Hi Stian,

It's a small world
Frank lived some years in my birthplace 's Gravendeel and raced at our team.

I organized those years gasthouses and race programs for Norwegian junior riders in Holland and Belgium during the season start.
Also been sometimes a host teammanager of the Norwegian juniorteam during some International races (Thor Hushovd was junior at that time, great guy).

The picture nr. 7 is before i installed the impactgear, at this picture i still got the reduce set from Axels.
Because that give me some troubles with broken gearwheels i got myself the impactgear with the DDG.
Nice Camo you got on your 1:48 Tiger II

Vennlig hilsen Wilco

May I ask what you guy's use to lube you're TU'S ?

I have some tamiya lube and some stuff called OKS that we used when we were racing 1/10 touring cars ( in the diff's)


IMG_0383 (Small) by maxsollie, on Flickr


IMG_0393 (Small) by maxsollie, on Flickr

Nice K.T.
The colorscheme of your tank is what Cyber hobby claims that it was the one in the battle of Berlin and was marked with 100 on the turret.
The tank shows the lack of materials at the end of the war, and is build up from working parts the Germans took from broken down tanks.
You can google the tank with King Tiger Berlin or King Tiger Cyber Hobby.

Greets Bas.

Great, thanks Bas

Further plans are to remove the plastic Tow Cables , but the tank is painted with them on so that means I have to do some fiddeling with colours to get it to look the same as the rest when I remove them.
I would like to get hold of some spare TC holders and the the holders for the cleaning rods , but that seems hard as they only come with the big , rather expensive , brass kit.

Also offcoz metall tracks. late Impact witk KK sprockets is my next buy when I get the money.

Well it's been a long time since I have posted here. I had some problems logging in.

Anyway, here are soem pic's of what I have done lately.


By maxmekker at 2012-05-29


By maxmekker at 2012-06-03


By maxmekker at 2012-06-03

Repaint


By maxmekker at 2012-04-28

Make cleaning rods from evergreen and test fit parts


IMG_3622 (Medium) by maxsollie, on Flickr


By maxmekker at 2012-05-29


By maxmekker at 2012-05-29


By maxmekker at 2012-04-28

Add some AK streaking grime , and pritty much done.


By maxmekker at 2012-04-28


By maxmekker at 2012-04-28

On to the other side.

Remove


By maxmekker at 2012-06-02

Replace


By maxmekker at 2012-06-02


By maxmekker at 2012-06-02

Damage and weld lines


By maxmekker at 2012-06-02


By maxmekker at 2012-06-02


By maxmekker at 2012-06-02


By maxmekker at 2012-06-02

How I did my weld lines

http://www.youtube.com/watch?v=KsH757_1 ... ature=plcp" onclick="window.open(this.href);return false;

Nice job Stian

Thank you.
Then I used some mr surfacer 500. Primer, and then hull red. AK worn effects and xf59+60. Let dry and then tap water and a stiff toothbrush.


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09

On with the work I used blackwash and AK streaking grime.


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09


By maxmekker at 2012-06-09

I think I'm happy with it now. Next up is to add some shell damage to the turret.


By maxmekker at 2012-06-09

Some work on the turret .Adding BD and blending it all in again.


By maxmekker at 2012-06-26


By maxmekker at 2012-06-26


By maxmekker at 2012-06-26

Adding some mr surfacer + xf 59-60 and AK yellow wash and MIG blackwash


By maxmekker at 2012-06-26


By maxmekker at 2012-06-26


By maxmekker at 2012-06-26


By maxmekker at 2012-06-26

Latest photo





and Video

http://www.youtube.com/watch?v=2QEbCwpW ... ature=plcp" onclick="window.open(this.href);return false;

King Tiger in Snow

http://www.youtube.com/watch?v=oRbTOGLw ... vQ&index=1" onclick="window.open(this.href);return false;