The hinge was this morning then printed.
But to install it I had to prepare a few things. In the upper part disturbed nor the old fortifications and the box and the gunner's hatch had to get away.
In order to mount the mount to the pivot, I have this but not glue it and attach the holes for the screws.
First, pre-drill the joint with a 2mm drill.
Then put the gun mount it and this pierce to the hinge as a template it with the 2mm drill.
Last drill out the mount from the top with a 3mm drill.
So you can then glue the joint base to the hull top, put through the gun carriage from the front and befesigen with a screw. So you get a stable, smooth-joint to Page Aim the cannon.
Next, the canon rocker stuck in the inner part of the mount, with 2mm pre-drilling and screw.
For installation of the rocker, I now had to cut a little bit. So the rocker but can be re-installed as described in the expansion.
[img]http://up.picr.de/19036608cp.jpg /img]
And so now looks like the scales in favor of the side Align.
I have already placed the servos to end for today.